Digital Moisture Meter MT-18 for Wood, Paper and Wall

Measurement Instructions:

• Remove the cap to expose the needle electrodes.
• Power ON the Instrument.
• Select the appropriate wood calibration scale A, B, C, or D (See the Wood Calibration Tables later in this guide) Using the “WOOD” button.
• Or Press the “PAPER/WALL” key to Choose Paper Mode or Wall Mode. Paper mode is used for testing Cardboard/Cartons. Wall mode is used for testing Sheetrock/wallboard/Floor.
• Push the needle pins into the material and observe the reading.
• Power OFF the instrument.

Auto Power OFF:

This instrument will be Auto powered off if there is no button pressing in 5 minutes. This design is for saving battery power consumption.

Specifications of Digital Moisture Meter MT-18:

• LCD Display With Backlight
• Principle: Electrical resistance
• Wood Range: 4~75%
• Paper Range: 4~90%
• Wall Range: 0.2~24%
• Resolution: 0.1%
• Accuracy: ±0.5%
• Electrode length: 10mm(0.4″)
• Electrode pins: Integrated
• Auto Power OFF: After approx.5 minutes
• Power Supply: 2*AAA batteries
• Meter housing: ABS plastic
• Operating Temperature: 0 to 40 (32 to 104)
• Dimensions: 145 X 67 X 32mm (5.7″ x 2.6″ x 1.3″)
• Weight: 200g (7.0 oz)

Wood Species Group Table:

A: Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork
B: Keruing, White Poplar, Beech, Cedar, Tola
C: Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry
D: Basswood, Larch, Pine, Birch

PAPER MODE:

Cardboard, Carton, Paper

WALL MODE:

Sheetrock, Wall Board, Floor.

1. We always have enough products in stock. Welcome your order anytime.
2. We have been a factory for over 8 years, OEM offered, welcome your big order!
3. All the parcels were sent by registered Airmail with a valid tracking number. We will track it until you get the parcel.
4. All of our products are under a 1-year guarantee.
5. We offer your choice with and without a rechargeable battery, You can choose the model with or without a rechargeable battery. Welcome your orders!